How To Properly Use A Pallet Jack. Keep your eyes on where you’re headed with one hand pulling the jack behind you. This includes loading, maneuvering, and unloading.
How to Operate a Manual Pallet Jack 6 Steps (with Pictures) from www.wikihow.com
Perform a basic pallet jack and workplace inspection at the beginning of every shift or before using the pallet jack for the first time each work day. This includes loading, maneuvering, and unloading. One or disconnect the battery connector to prevent unauthorized use.
Table of Contents
This Includes Loading, Maneuvering, And Unloading.
Use the handle to jack up the pallet jack. If there is no power to the pallet jack, check if the lead wire is plugged in properly on both ends of the cord. Survey the workplace the pallet jack may be used, clean up any spills, and move anything that could later be in the path of a moving pallet jack.
Park The Pallet Jack In Its Designated Spot When Not In Use.
Since the hydraulic pressure is what's required to operate the jack, any air pocket can disrupt that pressure and keep the jack from lifting. Operators should also wear gloves ensure a good grip on the pallet jack and the load being moved. Start moving the hand pallet jack towards the load with the prongs facing it and with your hands on the big metal steering handle.
Make Sure The Jack Is In Proper Working Condition Prior To Using;
Slide the pallet jack forks under the pallet slowly and evenly. Be aware of the surface you are using the pallet jack on. If you are pulling the jack out from a corner or wall, do not walk backwards.
When The Prongs Are Under The Skid, Pull The Vertical Stem Toward You, Away From The Pallet And Toward The Floor In A Diagonal Motion.
An overview of all of the components of a manual pallet jack such as the forks, hydraulic system, wheels and steering system, and how to properly operate each one; How do you change the hydraulic fluid in a pallet jack? Tips & tricks on the “other” forklift.
The Most Common Reason For A Pallet Jack To Stop Lifting Properly Is An Air Pocket In The Hydraulic System.
However, unlike forklifts, they don’t do any real lifting. Try to maintain a clearance of about 1 inch between the floor and the pallet. Perform a basic pallet jack and workplace inspection at the beginning of every shift or before using the pallet jack for the first time each work day.
Skip to content
