Remove Shower Drain Cover Pop Up. Unscrew if there are screws. Lastly, there are two touch shower drains that can be opened and closed with your toe.
To reach the stopper, the ball rod needs to be removed first. Once the cover is out, go ahead and remove any debris accumulated in. How to remove a pop up shower drain to unclog hair youtube.
Table of Contents
And So, We Will Discuss Some Other Methods Of Removing The Shower Drain Cover Depending On Their Type:
Take the drain cover off the shower and put the vacuum hose right up against the drain. Locate a screw in the centre of the cover. These require a screwdriver, but are easy to remove.
How To Remove A Pop Up Shower Drain To Unclog Hair Youtube.
Simply unscrew the cover and detach. Turn the vacuum on and that will extract all of the organic matter, including hair and soap scum. Use a screwdriver or set of pliers to unscrew the drain stopper bolt from the threaded hole in the center of the drain crossbar and the entire drain stopper will lift out of the drain.
Removing The Stopper The Ball Rod Holds The Stopper In The Drain.
Remove shower drain cover no screws : To remove, unthread the rod nut, pull the ball rod out, and remove the stopper from the drain. Once it starts to move, take the pliers and remove the shower drain cover.
However, In Further Investigating It Seems That You Need To Take A Pair Of Needlenose Pliers Or Similar Tool And Hold The Stem Under The Stopper So You Can Rotate The Stopper Out Counterclockwise.
Watco 3 25 in overflow plate assembly without screws in the bathtub shower drain accessories department at lowes com / drain pan and it has edges that feel sharp.another side note is that i read that some people had a problem turning the screws. With the cap raised, you can twist it counterclockwise to unscrew it and open up your drain. They have small tabs that you can pull on for easy removal.
They Can Be Pulled Straight Off, But Some May Require A Little Wiggling.
This will ensure that the screwdriver will not slide around during use. To reach the stopper, the ball rod needs to be removed first. Those drain covers can be removed by first pushing on the cover to open it.